產品分類PRODUCT CLASSIFICATION
展開
推薦產品Recommended products
相關文章Related articles
你的位置:首頁 > 產品展示 > 透鏡 > 非球面透鏡 >Edmund Optics模壓非球面聚光鏡
產品詳細頁Edmund Optics模壓非球面聚光鏡
簡要描述:Edmund Optics模壓非球面聚光鏡高數值孔徑提供用于OEM集成的完整文檔適用于照明應用通用規格數字孔徑 NA:0.625基底:Liba2000+焦距容差 (%):±5中心偏(弧分):≤25表面質量:As molded有效焦距/有效孔徑直徑比:0.8倒角:Protective bevel as neededShape of Back Surface
- 產品型號:
- 廠商性質:經銷商
- 更新時間:2024-11-07
- 訪 問 量:609
產品介紹
品牌 | Edmund Optics |
---|
Edmund Optics模壓非球面聚光鏡產品參數:
產品編碼 | Dia. (mm) | EFL (mm) | NA |
36-163 | 5.00 +0.0/-0.2 | 4.00 @ 587.6nm | 0.625 |
15-189 | 5.00 +0.0/-0.2 | 4.00 @ 587.6nm | 0.625 |
15-727 | 5.00 +0.0/-0.2 | 4.00 @ 587.6nm | 0.625 |
36-164 | 10.00 +0.0/-0.2 | 8.00 @ 587.6nm | 0.625 |
15-190 | 10.00 +0.0/-0.2 | 8.00 @ 587.6nm | 0.625 |
15-728 | 10.00 +0.0/-0.2 | 8.00 @ 587.6nm | 0.625 |
36-165 | 12.50 +0.0/-0.2 | 10.00 @ 587.6nm | 0.625 |
15-191 | 12.50 +0.0/-0.2 | 10.00 @ 587.6nm | 0.625 |
15-729 | 12.50 +0.0/-0.2 | 10.00 @ 587.6nm | 0.625 |
36-166 | 15.00 +0.0/-0.2 | 12.00 @ 587.6nm | 0.625 |
15-192 | 15.00 +0.0/-0.2 | 12.00 @ 587.6nm | 0.625 |
15-730 | 15.00 +0.0/-0.2 | 12.00 @ 587.6nm | 0.625 |
36-167 | 20.00 +0.0/-0.2 | 16.00 @ 587.6nm | 0.625 |
15-193 | 20.00 +0.0/-0.2 | 16.00 @ 587.6nm | 0.625 |
15-731 | 20.00 +0.0/-0.2 | 16.00 @ 587.6nm | 0.625 |
36-168 | 25.00 +0.0/-0.2 | 20.00 @ 587.6nm | 0.625 |
15-194 | 25.00 +0.0/-0.2 | 20.00 @ 587.6nm | 0.625 |
15-732 | 25.00 +0.0/-0.2 | 20.00 @ 587.6nm | 0.625 |
36-169 | 30.00 +0.0/-0.3 | 24.00 @ 587.6nm | 0.625 |
15-195 | 30.00 +0.0/-0.3 | 24.00 @ 587.6nm | 0.625 |
15-733 | 30.00 +0.0/-0.3 | 24.00 @ 587.6nm | 0.625 |
36-170 | 40.00 +0.0/-0.3 | 32.00 @ 587.6nm | 0.625 |
15-196 | 40.00 +0.0/-0.3 | 32.00 @ 587.6nm | 0.625 |
15-734 | 40.00 +0.0/-0.3 | 32.00 @ 587.6nm | 0.625 |
36-171 | 50.00 +0.0/-0.3 | 40.00 @ 587.6nm | 0.625 |
15-197 | 50.00 +0.0/-0.3 | 40.00 @ 587.6nm | 0.625 |
15-735 | 50.00 +0.0/-0.3 | 40.00 @ 587.6nm | 0.625 |
TECHSPEC® Edmund Optics模壓非球面聚光鏡經過精心設計,可集成到OEM儀器的照明光路中。這些聚光鏡可提供5至50mm的直徑,其中直徑較小的透鏡非常適用于醫療設備或便攜式儀器,而直徑較大的透鏡通常會集成到臺式分析設備中。前面的非球面表面采用模造方式以消除球面像差,而第二個表面經過磨制與拋光,以提高性能。可以提供完整的規格數據與圖紙,以協助執行設計集成。
注意: 如需自定義鍍膜選件, 請 聯系我們.
- 上一篇:模壓非球面聚光鏡
- 下一篇:模壓漫反射非球面聚光鏡